README

IMPORTANT!
Before you start please fully backup your current settings!

Files:
- airlite-config-preset: Load this preset at the airlite configuration manager
- sw.events: Load this events file at the general settings => Events/Commands
- airlite.mixer: ProppFrexx Mixer and Routing for Airlite (C:\Users\YOUR-USERNAME\AppData\Roaming\radio42\ProppFrexx ONAIR\4.0)
- Default.drl: GPIO Remote Mapping for Airlite (C:\Users\YOUR-USERNAME\AppData\Roaming\radio42\ProppFrexx GPIOClient\4.0)

How is the Airlite configured in this sample?
Channel 1-3: Mic
Channel 4: Player A 
Channel 5: Player B
Channel 6: PFL player and Overlay player
Channel 7: Cartwall 1 and 2
Channel 8: VoIP / Skype
First row of control buttons 1-8: Cartwall 1 (start / stop)
Second row of control buttons 1-8: Cartwall 2 (start / stop)

When playing the control button will blink fast from red-green, when finished it will be off.

Local soundcard: Monitor signal (same as PFL).

USB 1 Output (Main Out): In 1 at ProppFrexx. This channel has to selected for stream source. Hasnt to be unmuted. (see page 19 of the airlite manual)
USB 3 Output (Voice Track signal): In 2 at ProppFrexx for voice tracking and pre recording your voice. (see page 19 of the airlite manual)

Installation:
1) Import all files at the right direction.
2) Check your mixer settings and add the correct usb channels of the airlite to your single in- and outputs.
3) Restart ProppFrexx.


